![]() ![]() There might be a time delay between command and acknowledge. Never had to do this myself, but some swear by it (and yes I mean turn that on when using IP control, not serial as such. Note: In this model, set will send the Acknowledge after power on processing completion. USB Serial must be on if using a serial to USB adapter. ![]() EXT Link Support must be on if using the mini-jack serial port.ī. If option ‘a.’ doesn’t work, Press “Info” then “Settings” then “Mute” then “Power”Ģ) Navigate to Control>Sub Option and enable the serial control method that will be used.Ī. It is best to start with the TV in an Off state.ī. ![]() The generic IR remote MUST be used for either method. To configure serial control, the following steps are required:ġ) Enter Samsung’s Service Menu in one of two ways. Is the TV's IP reserved or static? Make sure it is.ĭid you ID using SDDP? If so (after ensureing the above) try identifying with the IP address (If I had to guess, the mac is likely showing as 'unknown' in the SDDP ID line)įinal thought - I've heard some dealers do this with some sammy models: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |